(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Children's Library | Biodiversity Heritage Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
See other formats

Full text of "Sewing"

Printed Party Flags 

Make] Projects 

hhiiilH ho/ 1 !/ tuMaal/ chare r\icf*f\\tat* 

build, hack, tweak, share, discover,- 

Printed Party Flags 

Written By: Linda Permann 



Cutting mat (1) 
Foam paintbrush (1) 
Point turner (1) 
Rotary cutter (1) 
Ruler (1) 
Scissors (1) 
Sewing machine (1) 
X-Acto knifed) 

© Make Projects 

Fabric (1 yd) 

1/4yd each of at least 4 different fabrics. 
Use as many as you like: a mix of prints 
and solids makes a nice banner. 

Thread (1) 

• Bias tape (3 yds) 
extra-wide double-fold bias tape. 1/2" 

• Wood block (1) 
You can use scraps or find this in the 
unfinished wood section of the craft 

• Craft foam (1) 

• Glued) 
Perfect Glue Formula 1 

• Paint (1) 
Acrylic paint in desired colors. If you 
plan on washing the banner, use fabric 
paint such as Jacquard Textile Color and 
be sure to set it when you're finished 
printing. Otherwise, cheaper acrylic 

www.makeprojects.com Page 1 of 5 

Printed Party Flags 

paint is fine. 


Create your own foam stamp and print some simple fabric flags to make party decor that's 
one-of-a-kind. Foam is inexpensive and easy to cut, with no special tools required. Combine 
printing with the fun of mixing fabrics and you might find yourself making a banner for every 
occasion! Try spelling out the name of a new baby for a shower gift that's sure to bring cheer 
to the nursery, or use a holiday icon for seasonal decorations. 

Step 1 — Make the stamp. 

• Print the cupcake template available for download under Files above. 

• Place the paper template over the foam sheet and cut out each shape. For the candle, first 
cut the outer shape, then cut out the inside. You may want to use an X-Acto knife for this 

• Glue the foam shapes to the wood block and allow them to cure for at least 1 hour. While 
you let the stamp cure, continue on to the fabric flags. 

© Make Projects 


Page 2 of 5 

Printed Party Flags 

Step 2 — Make the flags. 

• Cut twelve 11 "x8" rectangles of fabric. 

• Fold each rectangle in half lengthwise with right sides together and press. Stitch around 1 
short and 1 long side of each flag using a 1/2" seam. Trim the seam allowance to 1/4", clip 
the corners close to the edge, and turn each flag right side out. 

• Use a point turner if you have one to help turn out the corners. Press. 

© Make Projects 


Page 3 of 5 

Printed Party Flags 

Step 3 — Print the flags. 

science^ j^ /TO; 

• To make printing easier, decide which color of paint to use for each flag and group them 
accordingly. You may want to slide a piece of cardboard inside each flag as you print it to 
make sure the paint won't bleed through, and it's a good idea to practice on some scraps 
first to get the best results. 

• Starting with the lightest color, apply a coat of paint to the stamp with the foam brush. 
Center the stamp over a flag and press it down for 10 seconds. Remove the stamp to 
reveal your print! 

• Reapply paint between each stamping for best results. Make sure there's no paint clumped 
on the sides of the foam, or you may end up with a gloppy print. 

• To change colors, rinse the stamp under running water and rub away the excess paint. 
Stamp the rinsed stamp onto a folded paper towel until it comes out clean. 

• Make sure the stamp is dry before applying the next color of paint. Use a clean foam brush 
to apply the next color. Repeat for as many colors as desired. 

• Let the flags dry. If you're using fabric paint, heat-set the stamped designs according to 
the paint instructions. 

© Make Projects 


Page 4 of 5 

Printed Party Flags 

Step 4 — Finish the banner. 

• Press the bias tape to straighten any creases resulting from packaging. Lay out the bias 
tape with the wider fold on the bottom side. Arrange all 12 flags along the length of the 
tape, leaving about 3 1/4" of tape between each flag and about 6" of tape at the ends. 

• Slide each flag into place between the folds of the tape's open edge and pin in place. 

• Sew a straight stitch along the open edge of the tape, being sure to encase each flag as 
you go. 

• Fold back 1" at each end of the bias tape. Sew the short edge to the backside of the tape 
to form a hanging loop. 

• Hang the banner as desired. 

This project first appeared in CRAFT Volume 10 , pages 52-54. 

This document was last generated on 201 2-1 1 -03 1 2:59:25 AM. 

© Make Projects 


Page 5 of 5